Cr3+ doped Al2O3 nanoparticles: Effect of Cr3+ content in intensifying red emission

Cr³⁺-doped α-Al₂O₃ nanoparticles (Al_2−xCr_xO₃, 0.005 ≤ x ≤ 0.05) were synthesized by co-precipitation method. X-ray diffraction (XRD) patterns of Cr³⁺:Al₂O₃ nanoparticles revealed the crystallite size of ∼53 nm and electron microscopy (SEM & TEM) confirmed the spherical nanoparticle formation. Diffuse reflectance spectra (DRS) displayed peaks at 406 and 558 nm corresponding to the Cr³⁺ transitions which became prominent with the increase in Cr³⁺ concentration which was also evidenced by the gradually increasing pink coloration of the samples. Photoluminescence (PL) studies showed the sharp red emission at 694 nm (ruby line) which was observed for all samples. The Dq/B value for all samples was found to be greater than 2.3 confirming the presence of Cr³⁺ ions in the octahedral sites. Chromaticity diagrams displayed the maximum red appearance for the sample with x = 0.01 and a lifetime of 4 ms. The synthesized Cr³⁺:Al₂O₃ nanoparticles with smaller crystallite sizes and narrow near monochromatic emission can be used in various applications including sensing, lasing, and bioimaging applications.     

Energy Storage by Poly(<Emphasis Type="Italic">o</Emphasis>-anisidine) Matrix During Oxidative Hydrolysis

The chromaticity of poly(o-anisidine) (POAN) doped with different acids (HA), HA-doped POAN, has been studied by the spectrophotometric technique and the results were substantiated by molecular mechanics (MM+) calculations. The observed absorbance decrease (λ around 720 nm, dark green coloration) with increasing concentration of the inorganic oxidizing agent (KMnO₄) can be attributed to the oxidative hydrolysis mechanism. The oxidative hydrolysis constant (K _h) is highly dependent on the strength of the acid used. The HClO₄-doped POAN matrix has the ability to store about 128.878 kJ⋅g⁻¹ chromogenic energy (CE) at the wavelength 720 nm in a condensed lightweight form. MM+ calculations suggest that the potential energy (PE) in kJ⋅mol⁻¹ of the optimum molecular geometric (OMG) structure of the HClO₄-doped POAN matrix is at least two (2.052) times more stable than the OMG of the base form (POAN-EB) of the POAN matrix. Kinetic parameters of the oxidative hydrolysis reaction of the HA-doped POAN matrix were deduced from absorbance variations with time. The results of computer-oriented kinetic analysis indicate that the rate-controlling step for HA-doped POAN oxidative hydrolysis is governed by the Ginstling-Bronshein equation that represents three-dimensional diffusion (D4). Activation parameters for the oxidative hydrolysis of the HClO₄-doped POAN matrix were computed and discussed.     

位标器动平衡测试系统中的相位测量方法研究

提出了一种相位测量方法,该方法可以准确检测从位标器陀螺仪输出的钟形光电脉冲信号峰值点的位置并以其为时间基准点进行相位测量,并可判断被测两信号之间的时间间隔以及超前滞后关系.针对在现场中的干扰因素,提出了相应的解决措施.该方法电路简单;测量速度快;精度高;可靠性好.     

Studies on the solvatochromism of Fe(CN)2(phen)2

Summary The influence of organic solvents on the electronic spectra of Fe(CN)₂(phen)₂ has been investigated by trichromatic colorimetry. The color parameters of these solutions have been calculated on the basis of the absorption spectra and are described in the CIE and CIELAB color spaces. It has been shown that one of the parameters (the so-called hue angle) could be related to some acidity parameters of solvents. Thus, it is possible to calculate the hue angle and, therefore, to predict the color of solution if the solvent acceptor number is known, or vice versa.

---

Untersuchung zur Solvatochromie von Fe(CN)₂(phen)₂

Zusammenfassung Der Einfluß organischer Lösungsmittel auf die UV-Spektren von Fe(CN)₂-(phen)₂ wurde mittels trichromatischer Kolorimetrie untersucht. Die Farbparameter der Lösungen wurden aus den Absorptionsspektren berechnet und werden in den CIE- und CIELAB-Farbräumen beschrieben. Es konnte gezeigt werden, daß einer der Farbparameter (der sogenannte Farbtonwinkel) zu den Aciditätsparametern des jeweiligen Lösungsmittels in Beziehung gesetzt werden kann. Es ist daher z.B. möglich, die Farbe der Lösung vorherzusagen, wenn die Akzeptorzahl des Lösungsmittels bekannt ist und umgekehrt.

     

汽车太阳膜的色度与光谱特性分析

通过用带计算机控制的WGS-9型色度测量系统、UV-Vis 8500型双光束紫外-可见分光光度计和WGD-4A型光栅光谱仪定量测量和分析了某品牌汽车太阳膜的色度和光谱特性。测量分析结果表明：低红外透过率和紫外透过率与高可见光透过率是一对矛盾体,在选择太阳膜时只能有所侧重。如要求较高可见光透过的同时要避免过多紫外线照射,那应选择主波长为587.3 nm(浅蓝)或522.1 nm(钻石绿)的太阳膜。如要求较高可见光透过同时要兼顾隔热节能的功能,那么应选用色度主波长为497.3 nm(宝石蓝)或507 nm(翡翠绿)的太阳膜。     

Substituents Effects to the Electrochemical,and In Situ Spectroelectrochemical Behavior of Metallophthalocyanines: Electrocatalytic Application for Hydrogen Evolution Reaction

This study describes the effects of the number of fluoro substituents to the electrochemical, in situ spectroelectrochemical, and electrocatalytic activities of metallophthalocyanines for the hydrogen evolution reaction. Tuning of the number of fluoro groups shifts the redox processes and affects the aggregation tendencies of the complexes. An in situ electrocolorimetric method was applied to investigate the color of the electrogenerated anionic and cationic forms of the complexes. Cobalt phthalocyanines incorporated into Nafion film on a glassy carbon electrode decreases the overpotential of the working electrode for H⁺ reduction. The number and position of the electron withdrawing substituents and nature of the metal center change the electrocatalytic activities for the hydrogen evolution reaction in aqueous solutions.     

Electrochemical,In Situ Spectroelectrochemical,In Situ Electrocolorimetric and Electrocatalytic Characterization of Metallophthalocyanines Bearing Four Dioctylaminocarbonyl Biphenyloxy Substituents

This study describes the electrochemical, in situ spectroelectrochemical, in situ electrocolorimetric and electrocatalytic characterization of metallophthalocyanines bearing four dioctylaminocarbonyl biphenyloxy groups (MPc's). While CoPc gives both metal‐based and ring‐based redox processes, ZnPc and CuPc show only ring‐based reduction and oxidation processes. In‐situ electrocolorimetric method was applied to investigate color of the electrogenerated anionic and cationic forms of the complexes. Perchloric acid titrations monitored by cyclic voltammetry and spectrophotometry represent possible electrocatalytic activities of the complexes for hydrogen evolution reaction. CuPc having inactive metal center incorporated into a Nafion film on GCE decreases overpotential of the electrode for H⁺ reduction in aqueous solution.     

碱金属离子,Gd3+,Ce3+共掺杂的Lu3Al5O12陶瓷粉体的光学性能

用高温固相法制备了(Gd_xM_yLu_0.99-x-y)₃Al₅O₁₂:1%Ce³⁺(x=0,0.01,0.25,0.5,0.75,y=0,0.005,0.01,0.02,0.05,0.1,M=Li⁺,Na⁺,K⁺,Cs⁺)系列陶瓷粉体。X射线衍射仪对合成粉末微结构进行表征,FLS920光谱仪测量样品的激发光谱、发射光谱和荧光寿命,CIE色度系统分析合成材料的色坐标。X射线衍射仪结果显示,不同浓度碱金属离子、Gd³⁺、Ce³⁺共掺杂Lu₃Al₅O₁₂样品仍为立方晶相,但随着碱金属离子、Gd³⁺、Ce³⁺掺杂浓度的增加,合成样品衍射峰稍有向小角度偏移。在350 nm激发下,与Lu_2.97Al_5O₁₂:1%Ce³⁺样品相比,共掺杂Gd³⁺后的样品在511 nm附近发射强度降低且出现明显红移,随着Gd³⁺浓度增加,Ce³⁺能级寿命逐渐减小,范围为35~60 ns。与掺杂1%Ce³⁺,1%Gd³⁺样品比较,分别共掺杂2%的Li⁺、Na⁺、K⁺和1%的Cs⁺后样品发光强度提高了5.1倍,2.93倍,1.79倍,1.28倍,同时样品中Ce³⁺寿命继续减小。分别在λ=254.0 nm和λ=365.0 nm紫外灯照射下,随着Gd³⁺掺杂浓度的增加,观察到合成样品从深黄绿色变化为暗红色,色坐标显示样品发光由黄绿光区逐渐移动到红光区域,且共掺杂碱金属离子后,粉体的发光更亮。     

灰色关联分析结合色度法评价不同产地黄连质量

为了建立黄连色度测量方法并分析其与有效成分含量之间的相关性,应用灰色关联分析（GRA）与主成分分析（PCA）对不同产地黄连药材进行质量评价。收集了来自15个不同产区黄连药材,依据国际照明委员会CIE L*a*b*数字化系统,采用分光测色计测定15批黄连药材色度值,采用高效液相色谱（HPLC）测定表小檗碱、黄连碱、巴马汀和盐酸小檗碱4种生物碱含量,并运用SPSS 23.0软件对色度与生物碱含量进行相关性分析。将黄连药材中生物碱类成分含量、药材水分、灰分、浸出物含量及色度值作为考察指标,采用GRA法构建黄连质量评价模型并采用SIMCA-P 14.1软件进行PCA及正交偏最小二乘法分析;结果表明,色度测量方法准确可靠;相关性分析结果显示,黄连色度L^* 、a^* 、b^* 、E_ab^* （总色度值）值与表小檗碱、黄连碱、巴马汀和盐酸小檗碱的含量均有显著相关性。GRA分析结果显示,产地为重庆市的黄连与最优参考序列的相对关联度最高、质量最优;PCA分析结果显示产地为陕西省铜川市的黄连对主成分贡献率较高。GRA与色度测定所建立的黄连质量评价模型可作为黄连药材质量评价的参考依据。     

用于煤粉燃烧诊断的火焰颜色计测方法

在使用ＣＩＥ１９３１标准色度学系统定义的色度坐标（ｘ，ｙ）对煤粉燃烧火焰的颜色进行定量试验研究的基础上，本文通过计算比较，提出了可用于锅炉燃烧诊断的煤粉火焰颜色色度坐标近似计算方法。